Table of Contents
Advertisement
Optional: Connecting to a Stereo
System
STEREO
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Use the audio cables (white/red) to
connect [AUDIO OUT (L/R)] jacks of the
DVD Player to the corresponding AUDIO
IN jacks on the stereo system (cable
supplied).
01-39_DVP3040K_98_engRC3
Optional: Connecting Digital AV
Receiver
AV Receiver
OPTICAL
AUDIO
IN
DIGITAL
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3
Set the DVD player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 28
"Digital Output").
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
11
Connections
AUDIO
IN
DIGITAL
02/06/06, 11:03 AM
11
Advertisement
Table of Contents
