Download  Print this page

Setting The Tv Display; Progressive - Turning On/off - Philips DVP3040K/96 User Manual

Philips dvd player dvp3040k divx playback karaoke.
Hide thumbs

Advertisement

Setting the TV Display

Set the aspect ratio of the DVD Player
according to the TV you have connected.
The format you select must be available
on the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {TV DISPLAY}, then press 2.
2
Press 3 4 to highlight one of the options
below:
4:3 PAN SCAN –
Select this if you have
a normal TV and want
both sides of the
picture to be trimmed or formatted to fit
your TV screen.
4:3 LETTER BOX –
Select this if you have a
normal TV. In this case, a
wide picture with black
bands on the upper and lower portions of
the TV screen will
be displayed.
16:9 – Select this if
you have a wide-
screen TV.
3
Select an item and press OK.
TIPS:
The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
01-39_DVP3040K_98_engRC3
DVD Setup Menu Options

Progressive - turning on/off

In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player's Y Pb Pr jacks
to your TV that supports the progressive
video input. Otherwise, a distorted
picture will appear on the TV. For proper
progressive scan set up, see page 15.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {PROGRESSIVE}, then press 2.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
Follow the instructions shown on the
TV to confirm the selection (if any).
If a distorted picture appears on the TV
screen, wait for 15 seconds for auto
recovery.
31
02/06/06, 11:04 AM
31

Advertisement

Table of Contents

   Related Manuals for Philips DVP3040K/96

This manual is also suitable for:

Dvp3040k/98Dvp3040k

Comments to this Manuals

Symbols: 0
Latest comments: