Removing The System Board; Prerequisites - Dell XPS 8910 Service Manual

GUID-B54497E8-5AD5-4FF9-AD4A-F32FDBEDE1E8

Removing the system board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the
location of the connectors so that you can reconnect the cables correctly
after you replace the system board.
GUID-0DDE209F-8144-48F3-964F-F79D677BE7B8

Prerequisites

1 Remove the right-side
2 Follow the procedure from step 1 to step 2 in
3 Follow the procedure from step 1 to step 3 in
4 Remove the memory
5 Remove the graphics
6 Remove the solid-state
7 Remove the wireless
8 Remove the processor fan and heat sink
9 Remove the processor.
114
computer. After working inside your computer, follow
After working inside your
cover.
modules.
card.
drive.
card.
computer. For more safety best
"Removing the power-supply
"Removing the
assembly.
Before
www.dell.com/
unit".
antenna".