Power Supply; Inserting/Removing The Battery - Panasonic HC-PV100 Basic Operating Instructions Manual

Hide thumbs Also See for HC-PV100:
Table of Contents

Advertisement

Preparation

Power supply

∫ About batteries that you can use with this unit (as of July 2016)
The battery that can be used with this unit is VW-VBD29/VW-VBD58/AG-VBR59/AG-VBR89.
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead to
fire or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are
used we would recommend that a genuine Panasonic battery pack is used.

Inserting/removing the battery

Install the battery by inserting it in the direction
shown in the figure.
≥ Insert the battery until it clicks and locks.
Removing the battery
Make sure that the power switch is set to OFF and the
status indicator is turned off, and then remove by
holding onto it taking care not to drop. (l 25)
While pressing the battery release button, remove
the battery.
20
SQT1407

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents