Aluminium Processing; Accessories, Tools; Servicing And Maintenance - Festool OF 2200 EB Instruction Manual

Aluminium processing

The following precautions are to
be taken when processing aluminium for safety
reasons:
• Pre-connect a residual current circuit-breaker.
• Connect the machine to a suitable dust extrac-
tor.
• Clean tool regularly of dust accumulations in the
motor housing.
Wear protective goggles.

Accessories, tools

For safety reasons, only use origi-
nal Festool accessories and tools!
Festool offers you a comprehensive range of acces-
sories for your router:
• Routing tools for different applications.
• Guide rails for straight routing.
• Runner bases for different applications.
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
www.festoolusa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be interlocked
together. They also can be interlocked atop Festool
CT dust extractors.
– To open the Systainer:
• Turn the T-loc [21.1] to the position
– To lock the Systainer:
• Turn the T-loc [21.1] to the position
– To connect two Systainers:
• Place one Systainer on the top of the other
(Fig. 21 A).
• Turn the T-loc [21.1] to the position
(Fig. 21 B).
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the four
latches of the previous Systainer.
A
B 21.1

Servicing and maintenance

that requires opening of the motor or gear hous-
ing should only be carried out by an authorised
Customer Service Centre (name supplied by your
.
dealer)! Maintenance or repair work carried out
by an unauthorised person can lead to the wrong
.
connection of the power leads or other components,
which in turn can lead to accidents with serious
consequences.
or
move the plug from the power supply socket
before carrying out any maintenance or repair
work on the machine! Do not use compressed
air to clean the electrical tool! Do not try to clean
parts inside the machine in this way, as you could
let foreign objects in through the openings of the
machine housing.
are harmful to plastic parts. Some of these are:
Any maintenance or repair work
To prevent accidents, always re-
Certain cleaning agents and solvents
15
21