Memory Features - ULTICARE IPET PRO User Manual

How to view results stored
in memory
1. Press to turn on the meter and
press again to enter the animal
type selection mode. Press
to select a desired animal type
(Fig.38).
2. After selecting a desired animal
type, press to confirm.
3. Press to view previous results.
The "MEM" icon will be displayed
at the top. Initially, the "year"
will be displayed (Fig.39). After 1
second the month, day, and time
(Fig.38)
will then be displayed (Fig.40).
The most recent memory results
will be displayed first.
4. You can press
or
forwards and backwards through
the results.
5. Press button to exit the stored
test results and view the control
solution test result (Fig.41).
(Fig.39)

Memory Features

6. When the meter displays the last
or to scroll
Note:
The meter stores 500 results in the
memory. When the memory
is full, the oldest result will be
removed and replaced by the
most recent result.
(Fig.40)
stored test result, press
so the meter will display day
average results (Fig.42).
(Fig.41) (Fig.42)
button
21