Control Solution Results - ULTICARE IPET PRO User Manual

Control Solution Results

The iPet PRO meter is functioning
correctly only if the control
solution test result is within the
specified range printed on the test
strip vial. If the test result is out of
range, please repeat the test.
Out of range result may be
caused by:
Incorrect steps of performing
•
the test
The control solution temperature
•
is lower than 59°F (15°C) or
higher than 95°F (35°C)
Expired or contaminated
•
control solution
Expired or contaminated
•
test strips
Meter malfunction
•
20
Note:
The result will not be included
•
in day average calculation when
the iPet PRO meter is set in the
control solution test
DO NOT use iPet PRO meter
•
if the problem persists. Please
contact customer service
immediately.
mode.