Important Information - ULTICARE IPET PRO User Manual

Before testing
Always keep test strips in the
•
original vial. Tightly close the
vial immediately after removing
a test strip.
Replace the glucode chip every
•
time you begin using a new vial
of test strips.
Use each test strip immediately
•
after removing it from the vial.
Each test strip should only be
used ONCE.
Do not use test strips or control
•
solution beyond the expiration
date printed on the package since
this may cause inaccurate results.
Store your test strips and
•
the meter in a cool, dry place
between 39°F and 86ºF (4°C
and 30ºC). Temperatures beyond
the required range, as well as
humidity, can damage test strips
and lead to inaccurate results.

Important Information

Any change of medications based
•
on the iPet PRO Blood Glucose
Monitoring System results
without advice of a veterinarian is
NOT RECOMMENDED.
Never share a lancing device or
•
lancet with any other animal.
Only iPet PRO test strips and
•
control solution can be used with
this meter.
13