Connecting The Audio Cables - Philips DVDR3390 User Manual

Step 1: Basic Recorder Connections
VIDEO (CVBS)
EXT 1
TV-OUT ANTENNA-IN
EXT 2
S-VIDEO (Y/C)
DIGITAL IN
AV amplifi er/
receiver

Connecting the audio cables

This connection enables you to listen to
the sound.
Option 1: Using an audio cable
You can connect the recorder to a two
channel stereo system or receiver in
order to enjoy the stereo sound system.
Use the supplied audio cable (red/white
plugs) to connect the AUDIO
OUTPUT jacks to one of the following
devices with the same input jacks.
– a stereo system (for example, TV or
mini system.)
– a receiver with two channel analog
stereo.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
INPUT
L
R
AUDIO
Option 2
VIDEO (CVBS)
COMPONENT
P R Y
VIDEO
L
R
OUT 2
P B
COAXIAL
AUDIO
S-VIDEO (Y/C)
(DIGITAL AUDIO)
Option 2: Using a coaxial cable
You can connect the recorder to an AV
amplifi er/receiver with a digital
mutlichannel sound decoder in order to
enjoy multichannel surround sound.
Use a coaxial cable (not supplied).
Connect the recorder to the receiver/
amplifi er from the COAXIAL
(DIGITAL AUDIO) jack on the
recorder to the digital input of the
receiver.
Before you start operating, set the digital
audio output settings accordingly (see the
section "PLAYBACK settings – Digital
Audio Output".)
If the audio setting does not match your
stereo's capabilities, the stereo may
produce a strong, distorted sound or no
sound at all.
Helpful Hint:
– Do not connect your TVs audio output
jacks to the AUDIO OUTPUT jacks on this
recorder, this may cause unwanted noise.
(continued)
OUTPUT
L
R
OR
Option 1
TV
S-V ID E O
AU D IO IN
O U T
V ID E O IN
17