Stack Bandwidth And Partitioning Examples - Casio Catalyst 3750-E Installation Manual

Stack Cabling Configurations
Figure 2-3
wall-mounted side-by-side. Use the 1-meter and the 3-meter StackWise cables to connect the switches.
These configuration provide redundant connections.
Figure 2-3
Figure 2-4

Stack Bandwidth and Partitioning Examples

This section provides examples of stack bandwidth and possible stack partitioning.
Figure 2-5
redundant StackWise cable connections.
Figure 2-5
A
C
Figure 2-6
connections. This stack provides only half bandwidth and does not have redundant connections.
Figure 2-6
A
Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide
2-8
and Figure 2-4 are examples of recommended configurations when the switches are rack- or
Stacking up to Eight Switches in a Side-by-Side Mounting Configuration
Stacking Nine Switches in a Side-by-Side Mounting Configuration
shows an example of a stack of Catalyst 3750-E switches that provides full bandwidth and
Example of a Stack with Full Bandwidth Connections
B
shows an example of a stack of Catalyst 3750-E switches with incomplete StackWise cabling
Example of a Stack with Half Bandwidth Connections
B
Chapter 2 Switch Installation
OL-9774-04