Attaching The Rack-Mount Brackets - Casio Catalyst 3750-E Installation Manual

Installing the Switch

Attaching the Rack-Mount Brackets

To install the switch in a rack, you must first remove the screws from the switch chassis so that the
mounting brackets can be attached. For attachment at the front-mounting position, remove two Phillips
truss-head screws from the switch side panels
screw from the side panels. For attachment at the mid-mounting position, remove one screw. For
attachment at the rear-mounting position, remove one or two screws depending on the switch model.
Figure 2-10
41 42
Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide
2-12
Removing Screws from the Switch
43 44
45
46
47
48
47 X
49
X2 -1
50
X2 -2
51
C at al ys
t 3 7 5 0 -E
48 X
SE RI ES P o E -4 8
52
(Figure 2-10). For some switch models, remove only one
Chapter 2 Switch Installation
OL-9774-04