Download Print this page

Installing The Switch; Rack Mounting - Casio Catalyst 3750-E Installation Manual

Hide thumbs

Advertisement

Table of Contents

Installing the Switch

Installing the Switch
This section describes these installation procedures:
The illustrations shown in this section show the Catalyst 3750E-48 PoE switch as an example. Except
for wall-mounting, you can install the Catalyst 3750-E and Catalyst 3560-E switches following the same
procedures.
Rack-Mounting
To install the switch in a 19-inch rack, follow the instructions described in this section.
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to
ensure your safety:
Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide
2-10
Rack-Mounting, page 2-10
Wall-Mounting, page 2-15
Table- or Shelf-Mounting, page 2-17
After Installing the Switch, page 2-17
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest
component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in
Statement 1006
the rack.
Chapter 2
Switch Installation
OL-9774-04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 3560-e