Panasonic DC-GH5 Basic Owner's Manual page 83

[System Frequency]
You can change the system frequency of the motion pictures you record and play back.
> [Setup] > [System Frequency]
MENU
[59.94Hz (NTSC)]
[50.00Hz (PAL)]
[24.00Hz (CINEMA)]
• After changing the setting, turn the camera off and on.
• By default, the system frequency is set to the broadcasting system of your purchase region.
• When [System Frequency] is set to a broadcasting system different from that of your
region, images may not be played back correctly on the TV.
• If you are not familiar with broadcasting systems or will not be creating any motion
pictures for films, we recommend that you use the default setting.
• If you changed the setting but are not sure about the system frequency for the broadcasting
system of your region, perform [Reset] in the [Setup] menu.
∫ Once you change the system frequency
After changing the [System Frequency] setting, motion pictures may not be recorded or
played back if you continue to use the card that was inserted in the camera. We
recommend that you replace the card with another one and format (P16) it on the camera.
• If you continue to use the card that was inserted in the camera before you changed the setting,
the camera will operate as follows:
[Rec Format]
[AVCHD]
[MP4]/[MP4 (LPCM)]/
[MOV]
[Folder / File settings]
Set the folder and file name patterns in which images are to be saved.
Folder name
100ABCDE

1 Folder number (3-digits, 100–999)
2 5-digit user-defined segment
For regions where the TV broadcasting system is NTSC
For regions where the TV broadcasting system is PAL
This system frequency is for creating films
Recording
Recording is not possible
Recording is possible

You cannot play back motion
pictures recorded before you
changed the setting.
File name
PABC0001.JPG
 
1 Color space ([P]: sRGB, [_]: AdobeRGB)
2 3-digit user-defined segment
3 File number (4-digits, 0001–9999)
4 File extension
Menu
Playback
 
83
(ENG) DVQX1052