Panasonic DC-GH5 Basic Owner's Manual page 46

Recording
Selecting the desired focus area and saving a picture
1
Select an image with the [
2
Touch the desired focus area.
• If a picture that is in focus is not available for the selected
area, a red frame will be displayed. You cannot save a
picture in this case.
• You cannot select the edges of the screen.
• Touching [
the focus by dragging the slide bar during enlarged display.
(You can also perform the same operation by pressing 2/
1.)
3
Touch [
• The picture will be saved in JPEG format.
Merging multiple pictures to widen the focus range (Focus Stacking)
1
Touch [ ] in step
2
Touch the merging method.
[Auto Merging]
[Range Merging] Merges pictures with specified focus areas into a single picture.
3
(When [Range Merging] is selected)
Touch the desired focus area.
• Specify at least two areas.
• In-focus areas between the two areas will also be
selected, and the combined in-focus area will be indicated.
• Gray areas indicate areas that may, if selected, cause the
merged picture to look unnatural and areas that cannot be
selected.
• Touch the focus area again to cancel the selection.
4
Touch [
resulting picture.
• The picture will be saved in JPEG format.
• The camera may automatically correct the misalignments of
pictures caused by camera shake. If they are corrected, the
angle of view becomes slightly narrower when pictures are merged.
46
DVQX1052 (ENG)
] will enlarge the display. You can fine-adjust
] to save the picture.
2
of "Selecting the desired focus area and saving a picture".
Automatically selects pictures that are suited to be merged, and
merges them into a single picture.
• Priority will be given to pictures with closer focus.
• Pictures will be merged into a single picture and the resulting picture
will be saved when this item is selected.
] to merge the pictures and save the
] icon on the playback screen, and press 3.
Fn1
Fn2
Fn2
Fn2
Fn2