How To Remove The Side Panels; How To Remove The Back Panel - Mitsubishi Electric EHST20C-VM6HB Service Manual

Cylinder unit
Hide thumbs Also See for EHST20C-VM6HB:
Table of Contents

Advertisement

DISASSEMBLY PROCEDURE

20. How to remove the side panels

(1) Remove the front panel. (Refer to Procedure 1.)
(2) Remove the side panel by removing 12 screw fixing the
side panels (6 screws each on the right and left panels).
Note:
Photo 20 shows the right side panel only. The left side
panel will be removed by the same procedure.

21. How to remove the back panel

(1) Remove the front panel. (Refer to Procedure 1.)
() Remove the side panels. (Refer to Procedure 0.)
(3) Remove the 4 screws (2 each at the front and back) on
the top panel .
(4) Remove the 2 screws on the back panel, and pull out the
back panel while lifting the top panel.
Note:
The handles are removed by pushing them up.
OCH531
Photo 20
Screws
(Top panel)
Side panel (Left)
Screws
Photo 21
Top panel
8
PHOTOS
Side panel (Right)
Screws (Top panel)
Handles
Screws
(Back panel)
Screws

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents