DISASSEMBLY PROCEDURE
19. Remove the liquid refrigerant temp. thermistor (TH2)
/ flow water temp. & return water temp. thermistor
(THW1,THW2) / tank water temp. thermistor (THW5)
(1) Remove the front panel. (Refer to Procedure 1.)
(2) Remove the control box cover. (Refer to Procedure 3.)
(3) Disconnect the following thermistor connectors on the
controller board and release the lead wires from cable
clamps and bands.
• TH (TH) (cable clamp, cable strap, fastener and band)
• THW1, THW (THW1) (cable clamp, cable strap, fastener and band)
• THW5 (THW5) (cable clamp, cable strap, fastener and band)
(4) Remove the thermistors from the thermistor holders.
Photo 19-2
Thermistor
connectors
<TH>
<THW1>
<THW>
<THW5>
Cable
clamp
Cable strap
Fastener
Band
OCH531
PHOTOS
Photo 19-1
Thermistor
Thermistor
<TH>
<THW>
8
Thermistor <THW1>
Thermistor <THW5>