Contents 9 Troubleshooting General About Bluetooth device 1 Important Know these safety symbols 10 Notice Hearing safety 2 Your DJ sound system Introduction What's in the box Overview of the DJ sound machine 3 Get started Use the shoulder strap Power supply Turn on or off 4 Mix your music with djay 2...
1 Important Know these safety symbols • Unplug this apparatus during lightning storms or when unused for long periods of time. • Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. • Install all batteries correctly, + and - as marked on the unit.
Hearing safety Listen at a moderate volume. • Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss.
Check and identify the contents of your package: • DJ sound machine • Power cord • Shoulder strap • Headphone converter (6.5mm to 3.5mm) • Short user manual Always there to help you Register your product and get support at www.philips.com/welcome Question? Contact Philips Short user manual...
Overview of the DJ sound machine a AUX OUT • Pause or resume play. • Connect an external device. (6.5mm) • Set the cue point while playing the • Connect a headphone. track. c AUX IN i Turntable 1/2 • Connect an external device. d HEADPHONE VOL.
Page 8
• Turn the product on or off. n LO/MID/HI • Adjust low/mid/high frequency. o CROSS FADER • Adjust the output balance of the two tracks. p TEMPO • Adjust the tempo of the current track. q VOLUME • Adjust the volume of the current track.
3 Get started Option 1: AC power Warning Always follow the instructions in this chapter in • Risk of product damage! Make sure that the power sequence. supply voltage corresponds to the voltage printed on the back or the underside of the product. •...
Open the battery compartment. Insert 8 batteries (type: R20/ D CELL/ UM 1) with correct polarity (+/-) as indicated. Close the battery compartment. Turn on or off Press repeatedly to turn the product on or off.
4 Mix your music with djay 2 Compatible iPod/iPhone/iPad The product supports the following iPod, iPhone, and iPad models: Made for. • iPod touch (5th generation) • iPhone 5 • iPad mini • iPad 4 Install the djay 2 application Note • The DJ related features of this product work with the djay 2 application.
Set cue point Note • Press and hold for 2 seconds to clear the cue point. A cue point is a marker at a precise time in the • Once a cue point is set, the track jumps to that point every time you press duration of a track.
Adjust the cross fader Slide the cross fader to adjust the output balance between the tracks playing on the two turntables. When the cross fader is slid to the left: • The track on turntable 1 is played through the micro system. •...
• Rotate the outer area of the turntable to change the tempo of the track. • Touch the inner area of the turntable to pause the playback. Search mode In search mode, you can rotate the turntable to fast forward or backward the track. Record the mixed tracks •...
5 Play from Bluetooth- enabled devices With this product, you can listen to audio from Bluetooth-enabled devices. Press on the top panel. Connect a device » The Bluetooth indicator flashes blue. Note • Make sure that your Bluetooth device is compatible with this product. •...
Play from Bluetooth device After successful Bluetooth connection, play audio on the Bluetooth device. » Audio streams from your Bluetooth device to the product.
6 Play from iPod/ iPhone/iPad You can enjoy audio from iPod/iPhone/iPad through this product. Listen to the iPod/iPhone/ iPad Connect the iPod/iPhone/iPad to this product through the lightning connector. Play music on the iPod/iPhone/iPad. Charge the iPod/iPhone/iPad Once connected, the iPod/iPhone/iPad begins to charge.
7 Other features Play from an external device With this product, you can also enjoy audio from an external device such as an MP3 player. Connect an audio input cable (not supplied) with a 3.5 mm connector on both ends to • the AUX OUT or AUX IN socket on this product, and • the headphone socket on an external device.
8 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 60 W RMS Frequency Response 60 Hz - 16 kHz, ±3 dB Signal to Noise Ratio > 65 dBA Audio-in Link 0.5 V RMS 20 kohm Speakers Speaker Impedance 8 ohm...
If the problem remains • For some devices, Bluetooth connection unsolved, go to the Philips Web page (www. may be deactivated automatically as a philips.com/support). When you contact Philips, power-saving feature. This does not indicate make sure that the device is nearby and the any malfunction of this product.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. “Made for iPod, ” “Made for iPhone, ” and “Made for iPad” mean that an electronic accessory...