Chapter 3 Signal And Control Connections; Rear Panel Of Hmv160; Introduction Of Hmv160 Board Series - OSEE HMV160 User Manual

Chapter 3 Signal and Control Connections

HMV160 Processor: The 3RU main processor of HMV160 equips with dual power supply,
multiple input boards, output boards, and so on.
The internal bus is used to connect the processing module and the power supply. All modules are
fixed in the 3RU frame. Every processing module works with the corresponding back connector.

3.1 Rear panel of HMV160

1. Power input connector
2. Video input connector （BNC）
3. GPIO connector (DB26)
Stereo input /output connector (DB26)
LTC input connector (DB26)
4. HDMI output connector
5. DVI/VGA output connector（DVI-I）
6. Ethernet port（RJ45） ：10M/100M autosensing.

3.2 Introduction of HMV160 Board Series

Board model
HMV160-I4A8G8
HMV160-I4AOG16T
HMV160 High-definition Multi-viewer Display Processor
Fig.3-1 the rear panel of HMV160
Appearance Description
 4-Ch autosensing inputs on HD/SD/Composite (BNC);
Board  1DB26 connector, which includes 8 Stereo audio inputs
and 8 GPI/O.
 4-Ch autosensing inputs on HD/SD/Composite (BNC);
 1DB26 connector, which includes 1 Stereo audio
Board
output, 16 GPI/O and 1 LTC input.
-9 -
User Manual