3.1 Rear panel of HMV160 ......................9 3.2 Introduction of HMV160 Board Series ..................9 3.3 Signal Connection Instruction of HMV160 Board Series ............. 10 3.3.1 Main board ........................10 3.3.2 Model of Back Connector: HMV160-I4A8G8 and HMV160-I4AOG16T ....10 3.3.3 Model of Back Connector: HMV160-I4O1E ..............
Support flexible setups of alarm, time code, GPIO and so on. According to the needs of user, HMV160 can group different scales of display system to meet the occasions of different monitoring scale and different applications. The multiple-in-one mode makes the user to monitor multiple signals on one output display in real time.
HMV160 High-definition Multi-viewer Display Processor User Manual Strong signal monitoring function. Support multiple outputs in single frame; Support up to 64 pieces of images display. Simple windows setup and control via mouse. Supporting analog audio input. Supporting the stereo audio monitoring of embedded audio and external audio.
1.4 Frame Introduction Model Appearance Description The 1RU main processor of HMV160 can house up to 4 modules, dual power HMV160-FR1 1RU Frame supply and air cooling system. The 3RU main processor of HMV160 can house up to 16 modules, dual power...
FAN:the indicator lamp of fan. 3: The fan and air vents Rear panel For the HMV160-FR3 frame, it includes two power connectors and can house up to 16 modules. For the connecting descriptions, please refer to the following sections. Back connector...
480W 2.2 Unpacking the Module 2.2.1 Check the Packing List The packing list includes one or more models of HMV160 unit, user manual, warranty card and the other accessories. 2.2.2 Preparing the Product for Installation Check the packing list. Contact your dealer right now if any items are missing.
2.4 Rack Installation Install the frame to the rack. Via the ear holder on both sides of the frame, install the HMV160 frame into a standard 19” rack, using the proper screws and washers, which are not included in the packing list.
Step 5: Get the module installed in the slot, push the module slightly along the slot, press module again to confirm that the module is installed firmly and then close swivel handle. Step6: Install the front panel. Fig. 2-1 Installation of 3RU Frame of HMV160 Series 2.6 Making the Connections Please connect signals based on chapter 3.
Please do not remove the back connector when the power is turned on. 2.8 Remove the Power Supply Module There are two power supply modules in the HMV160. Please refer to the following methods to remove the power supply module.
User Manual Chapter 3 Signal and Control Connections HMV160 Processor: The 3RU main processor of HMV160 equips with dual power supply, multiple input boards, output boards, and so on. The internal bus is used to connect the processing module and the power supply. All modules are fixed in the 3RU frame.
2-Ch HDMI outputs (HDMI); dual discrete video HMV160-I4O2E Board outputs; 1-Ch 10M/100M autosensing Ethernet port. 3.3 Signal Connection Instruction of HMV160 Board Series 3.3.1 Main board Fig.3-2 Input main board Fig.3-3 Output main board 3.3.2 Model of Back Connector: HMV160-I4A8G8 and HMV160-I4AOG16T Fig.3-4 Back connector 1...
Page 14
AIN01~AIN16:Analog audio input connector from No.1 to No.16. GPIO17~GPIO24:GPIO connector from No.1 to No.8. Used as GPI or GPO, it can be flexibly configured. Table Description of DB26 PIN (For board model:HMV160-I4A8G8) Signal Name Description Signal Name Description...
SMPTE12M (EBU-3259-E). GPIO19: Serial interface TXD+ GPIO23: Serial interface TXD- GPIO20: Serial interface RXD+ GPIO24: Serial interface RXD- Table Description of DB26 PIN (For board model:HMV160-I4AOG16T) Signal Name Description Signal Name Description...
The whole process is finished under the control of system control software. HMV160 control software is divided into two parts. One part is installed in the embedded processor. It is used to control HMV160 main processor to process and integrate with information of various signal source.