Battery Installation; Important Battery Information - WowWee COJI User Manual

BATTERY
INSTALLATION
COJI™ BATTERY DIAGRAM / INSTALLATION
3 x "AAA" size alkaline batteries
Installing or changing batteries in COJI™:
1. Lay COJI™ down so that the battery
compartment faces upwards. COJI™
requires 3 x "AAA" size alkaline batteries
(not included).
2. Using a Phillips screwdriver (not included)
remove the screws on the battery
compartment cover.
2
3. Remove any existing batteries and insert
new batteries according to the diagram.
Ensure that the positive and negative
polarities match the illustrations inside the
battery compartment.
4. Replace the battery compartment cover
and tighten screws using the screwdriver.
Do not over-tighten.
IMPORTANT BATTERY
INFORMATION

IMPORTANT BATTERY INFORMATION:

• Use only fresh batteries of the required size
and recommended type.
• Do not mix old and new batteries, different
types of batteries [standard (Carbon-Zinc),
Alkaline or rechargeable] or rechargeable
batteries of different capacities.
• Remove rechargeable batteries from the
toy before recharging them.
• Rechargeable batteries are only to be
charged under adult supervision.
• Please respect the correct polarity, (+) and (-).
LOW BATTERY INDICATORS:
For additional information, check out the COJI™ App or go online to:
3
http://wowwee.com/coji
• Do not try to recharge non-rechargeable
batteries.
• Do not dispose of batteries into fire.
• Replace all batteries of the same type/
brand at the same time.
• The supply terminals are not to be
short-circuited.
• Remove exhausted batteries from the toy.
• Batteries should be replaced by adults.
• Batteries should be recycled or disposed of
as per state and local guidelines.
When the batteries grow weak,
COJI™ will move very slowly, its chest
will begin flashing red, it will make a
low battery indication sound, and will
briefly display a low power icon on its
LCD screen. You can also see current
battery levels via the COJI™ App.
When this happens, power OFF and
replace all batteries.