Connections; Basic Connections; Picture; Sound - Philips DVD760 Owner's Manual

Basic Connections

Please refer to the instruction books of
your TV, VCR, Stereo or other devices as
necessary to make the best connections.
The following guidelines are options for
the best picture and sound quality
available on your DVD player.

Picture

* Use CVBS Video Output for good
picture quality.
** Use S-Video Output for better
picture quality.
*** Use Component Video Output for
best picture quality.
Use Component Video Out with
Progressive Scan enabled for excellent
flicker-free picture quality (to enable this
you need a Progressive Scan TV).
Your TV may have only an RF-style input,
usually labeled Antenna In, 75 ohm or RF
In and you will need an RF modulator to
operate. See your retailer on RF
modulator availability and operations.

Sound

1
Digital audio connections provide the
clearest sound with a digital amplifier or
receiver. Connect the DVD player's
COAXIAL or OPTICAL DIGITAL AUDIO
OUT to your amplifier or receiver.
2
If the above connection is not possible,
use the audio cables (white/red) to
connect AUDIO IN (L/R) jacks to your
amplifier, receiver, stereo or TV.
Warning!
– Never make or change
connections with the power
switched on.
– Connect the DVD Player directly
to the TV.
– Do not connect the DVD player
AUDIO OUT to the PHONO IN of
your amplifier or receiver.

Connections

9