Using Component Video Jack (Prcr Pbcb Y) - Philips DVD760 Owner's Manual

Back
of TV
AUDIO IN
TO TV
AUDIO IN
3
GITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
S-VIDEO
AXIAL OPTICAL
IMPORTANT!
– Component Video connection
provides highest picture quality.
These options must be available on
your TV.
Using Component Video jack
(PrCr PbCb Y)
1
Use the component video cables (red/
blue/green) to connect the DVD Player's
PrCr / PbCb / Y jacks to the
corresponding Component video input
jacks (or labeled as PrCr / PbCb / Y or
YUV) on the TV (cable not supplied).
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE.
3
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
Pr/Cr
Pb/Cb
Y
TO TV
Y Pb/Cb Pr/Cr IN
2
R L
VIDEO
PROGRESSIVE
INTERLACE
Pr/Cr Pb/Cb
Y
S-VIDEO
Progressive / Interlace SELECTOR
This switch will change the type of signal
1
output from the Component Video Out
on the player.
Interlace:
Select this setting when connected to a
standard (interlace format) TV.
Progressive:
Select progressive when you have a TV
that can accept progressive signals (480/
525p) to enjoy accurate colour
reproduction and high quality images.
Connections
R L
PROGRESSIVE
INTERLACE
Pr/Cr Pb/Cb
VIDEO
Y
11