Pixelpoint Opos Files - PAR EverServ ES500 Installation And Configuration Manual

PixelPoint OPOS Files

If the Windows path on your system differs from the one shown in these instructions,
Extract the files from PixelPoint OPOS.zip, and then perform the following steps:
1. Copy
DrawerOPOSes500.dll
Create this folder if it does not already exist.
2. Copy the following files into C:\Windows\System32:
Cocash.ocx
Codisp.ocx
Opos20.dll
3. Open Windows Start Menu and type "cmd". Right-click on cmd (the
Run as administrator. Agree to the UAC notification if it appears.
4. Type "regsvr32 C:\Windows\system32\Codisp.ocx" in the command line, and then
press Enter. This will register Codisp.ocx in the Windows Registry. You should get the
following message:
Repeat steps 3 to 4 for Cocash.ocx. They must be registered individually. After both OCX files
have been registered, proceed to the next section.
Page 6
modify the paths in these instructions accordingly.
and
PoleShowOPOS.dll
Copyright © ParTech, Inc. 2013. All Rights Reserved.
to the \PixelPOS\DLLS directory.
icon), and select
6/13/2013