User Controls; Bee8 Playback; Usb Download And Redundant Record Capability - Reach Bee8 User Manual

When the Bee8 finishes restarting, it may be integrated into the existing IT infrastructure. Please confirm your settings on
the front panel of the Bee8 that the IP address, Subnet, and Gateway information is correct.
You may choose to continue with the physical integration of the system at this point, or go back and configure the rest of
the operating parameters.

User Controls

Bee8 Playback

The Bee8 has the ability to playback content, and control that playback by the front panel controls pictured above.
To playback a file on the Bee8
1. Press the Play button.
2. Use the scroll knob to find the file you wish to playback.
3. When you find the file, press the scroll knob. The content will start playing back.
4. The Pause and Stop buttons are active when playback is engaged so users can pause content or stop while
playing back.

USB Download and Redundant Record Capability

The Bee8 can perform redundant recording when a USB flash drive is plugged into the USB 2.0 port on the front panel.
When the Bee8 is recording, the file is built both on the internal 1TB hard drive and the USB storage device.
Alternatively, when a recorded file is completed, A user may insert a USB device into the USB 2.0 port, press the
Download button and a copy of the file will be downloaded onto the device.
After the USB flash disk or USB mobile HD is inserted in the USB connector, Bee8 will make self-check on the USB flash disk or
USB mobile HD. In case that the available storage space is smaller than 1G, the text "USB" will flash on the LCD Display.
Recording will not be started. However, recorded files may be downloaded to the USB flash disk or USB mobile HD. If the USB
device has multiple partitions, a prompt will be displayed on the LCD Screen for partition selection. When downloading video
files, if the available space is equal to or less than 50MB during the downloading, a prompt will be displayed on the LCD
Display and the downloading will stop. USB download is disabled when Bee8 is recording, however redundant recording is
possible. (Supported Formats: EXT3, NTFS, FAT32). This USB port does not provide power to an external disk drive powered by
USB!
P a g e | 9 Bee8 User's Manual Reach/BTX