System Info Page; Section 5 External Control - Reach Bee8 User Manual

System Info Page

The System Info page displays all the working verions of the internal software, the Bee8 Serial Number, Drive utilization,
and what server the Bee8 is connected to, as well as if the unit is under control of the Manager Lite App.

Section 5 External Control

Telnet Control considerations
Reach Engineers have strived to make the Bee8 an easily and comprehensively controllable device. This manual provides
the Record Function commands for both Telnet and serial communication. A separate manual provides the entire list of
commands utilized for both Telnet and serial communications
To establish communications with the Bee8, point the control device at the Bee8 IP address followed by the Telnet port
(15555). Example 192.168.1.1:15555
When controlling the Bee8, each command, or set of commands is a unique Telnet session. It is necessary, therefore, to
send a login string with each command set sent to the Bee8. The default Telnet user name is reach, and the default
password is szreach.
Every control system is different, but for the most part, commands need only be sent once in each session. In less
capable control systems, commands may need to be sent twice in order for the Bee8 to respond appropriately.
P a g e | 35 Bee8 User's Manual Reach/BTX