Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SKY-HERO ANAKIN ARF
Summary of Contents for SKY-HERO ANAKIN ARF
- Page 1 N AT U R A L B O R N R A C E R Anakin User guide V1.0 GUIDE Version...
-
Page 2: Safety Advice
THIS AIRCRAFT IS NOT A TOY! All SKY-HERO aircraft can be considered as a sophisticated leisure products, which require handling with care and caution in order to avoid injury to yourself or others. Ensure that you fully review all of the information in this instruction manual and familiarise yourself with the characteristics of this SKY-HERO aircraft before attempting to fly it.This instruction manual has been designed with safety in mind and is provided to help you assemble your... -
Page 3: Required Equipment
THIS AIRCRAFT IS NOT A TOY! All SKY-HERO aircraft can be considered as a sophisticated leisure products, which require handling with care and caution in order to avoid injury to yourself or others. Ensure that you fully review all of the information in this instruction manual and familiarise yourself with the characteristics of this SKY-HERO aircraft before attempting to fly it.This instruction manual has been designed with safety in mind and is provided to help you assemble your... -
Page 4: Prepare Your Anakin
This instruction is for se ng up the inbuilt CC3D flight controller that comes with your ANAKIN FPV ARF. If you use Sky-Hero Link 9 radio with its receiver go to page XX Mount your receiver on the upper frame with double-sided tape. - Page 5 advantage of such a PPM signal is that only one signal wire is needed instead of all the individual wires. For PPM receiver, the HITE and REY wire of the multi colored signal wire needs to be swapped FIRST, then connect the REY RED BLACK plug to the PPM output of your receiver, no other wires need to be connected.
- Page 6 According to your local policies you can amplify the emission signal up to To do so, you have to follow the instructions described in the pictures beneath Cut the wire to turn 25mW to 200mW or reconnect it to turn from 200mW to 25mW. Sky-Hero VTX table for your reference...
- Page 7 After wiring and radio se ng, download and install the OpenPilot CS software to setup the CC3D. Download OpenPilot So ware (VERSION 15.02.02) Download OpenPilot Software (VERSION 15.02.02) Windows NSIS installer: Windows NSIS installer: http:/www.sky-hero.com/softwares/Anakin/OpenPilot/15.02.02/OpenPilot_WIN32_15.02.02.exe http www.sky-hero.com softwares OpenPilot 1 . OpenPilot IN3 1 . .exe Mac OS X distribu on image : http:/www.sky-hero.com/softwares/Anakin/OpenPilot/15.02.02/OpenPilot_MACOSX_15.02.02.dmg http www.sky-hero.com softwares OpenPilot 1 .
- Page 8 Select Multirotor and click Next Keep the default uadcopter , click Next to setup ESC On the ESC menu we have Standard ESC, Rapid ESC and OneShot ESC. Now the basic configuration has completed, review the se ngs and click Next .
- Page 9 Click Next Now the wi ard will calibrate the output of the highlighted motor in the diagram. Please double check if the motor s rotating direction is the same as the one showing in the diagram. Follow the instructions to find the neutral rate (slowest constant speed) of the first motor and click Next , then do the same for the three other motors. Click Next to conti- nue.
- Page 10 STEP 4: SETUP ANAKIN SETTINGS IN FLIGHT CONTROLLER This step is mandatory if you’are not using a LINK9 Now the basic setup of CC3D is completed, you need to double check that everything is done correctly. o back to OpenPilot homepage and click Configuration tab at the bot- If you’ve chosen PPM receiver in the wi ard tom and have a look at the H Se ngs .
- Page 11 Select Acro then click Next . Select the correct mode according to your transmitter and click Next , carefully follow the screen prompt until the calibration process is finished. Make sure you fully understand the arming process and select the pre- ferred arming combination under “Arming Settings”.
- Page 12 This step is not mandatory! Whether you use Link9 or a another radio controller. nl ad en il t r le le on the Sky-Hero website. Please make sure to use a Sky-Hero profile file. You can FOR YOUNG PILOTS (beginners): FOR YOUNG PILOTS (beginners): Early beginners setup: http www.sky-hero.com softwares PIDS beginner.uav.
- Page 13 They can be combined almost to infinity. To make changes on the frame, please refer to the Anakin v1. .pdf (click on the link or go to www.sky-hero.com) Also, included in the box, you will find jig s to calibrate the geometry of Anakin.
- Page 14 Sky-Hero recommends that you use a propeller balancer to balance your propellers, then install the propellers on each motors - (ensuring that their...
-
Page 15: Using Link9
This step is mandatory if you are using a LINK9 To use your Anakin ARF with your Link9 YO M ST first upgrade the Sky-Hero CC3D flight controller with the latest firmeware. To do so, you must previously download the OpenPilot Software ( ERSION 1 . - Page 16 Yaw: it can return to the central position when released. Yaw: it can return to the central position when released. HOW TO CONNECT & BIND (with Sky-Hero LINK9 RX & TX) ith Link9. you have to connect with the cable as shown on the picture.
-
Page 17: Starting Sequence
STARTING SEQUENCE STARTING AND STOPPING MOTORS P SH O H ON ROLS O ORNER POSI ION AY E HAN ED IN OPENPILO SOF MODE 2 BEFORE TAKE OFF 1: OPERATE YOUR AIRCRAFT SAFELY Refer to and follow all safety precautions mentioned in the eneral Instructions and uidelines for use section of this manual. - Page 18 LIMITED WARANTY WARRANTY AND REPAIRS SKY HERO SKY HERO SKY HERO WARRANTY PERIOD : SKY HERO WARRANTY LIMITATIONS SKY HERO SKY HERO SKY HERO : SKY HERO SKY HERO SKY HERO ATTENTION DAMAGE LIMITATION SKY HERO SKY HERO SKY HERO SKY HERO QUESTIONS, ASSISTANCE AND REPAIRS SKY HERO...
- Page 19 www.sky-hero.com...
Need help?
Do you have a question about the ANAKIN ARF and is the answer not in the manual?
Questions and answers