Alignment And Adjustment - Samsung SMX-K40BN Service Manual

8.

Alignment and Adjustment

8-1 Adjustment
8-1-1 Preparing Admin mode
[Step 1]
Connect the power to camcoder.
q
Turn on the camcorder. Press the "ok" button, if it shows time setting menu. You can see the "Record STBY"
w
mode.
[Step 2]
Press the 'LCD Enhancer' key first and then press 'OK' key for 3 second.
q
If the control mode displays on the monitor as shown in picture 8-1, move the UP/DOWN button to
w
select "CAMERA ADJUST", and press the OK button.
If the OSD displays on the monitor as the Fig. 8-2, the control mode is set successfully.
e
[Step 3]
After finishing the Camera adjust, escape from the Admin mode to the highest menu by pressing
q
the BACK. After finishing the control, escape from the control mode to the highest menu by pressing the Menu
Key. After Storing the set value, reset the power.
Samsung Electronics
> CAMERA ADJUST
+ EEPROM ADJUST
+ MODEL OPTION
+ K40
+ SELF CHECK
+ USG
+ 3AUTO TEST
(09:43:32 Mar 30 2009) : [MENU] EXIT
(2009-05-28) : LAST EEPROM TABLE
Fig. 8-1
> HALL
+ IRIS
+ WB3100
+ WB5100
+ LENS
+ 3M LENS
+ ZOOM VR
(09:43:32 Mar 30 2009) : [MENU] EXIT
(2009-05-28) : LAST EEPROM TABLE
Fig. 8-2
Alignment and Adjustment
8-1