Adjusting The Main Shaft Support; Adjusting The Position Of The Driving Gear Cover - ELNA E9020 Service Manual

(29) Adjusting the main shaft support

Press main shaft support 1 in the direction of P as shown in the illustration and fix it.
At this time, press main shaft 2 to such an extent that it bends upward by 0.05 mm.

(30) Adjusting the position of the driving gear cover

Fix driving gear cover 1 at the position where the groove for screwdriver
comes to the center of the opening portion of driving gear cover 1.
How to adjust
How to adjust
Adjustment drawing
2
1
Adjustment drawing
1
Opening portion
38