Product Specifications - Philips htl1193b User Manual

7 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
• RMS total output power: 80W RMS (+/-
0.5 dB, 10% THD)
• Frequency response: 40 Hz-20 kHz / ±3
dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Total Harmonic Distortion: <1%
• Input sensitivity:
• AUX: 2Vrms +/-100mV
• AUDIO IN: 1Vrms +/-100mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 8 kbps-320 kbps
Radio
• Tuning range: FM 87.5-108 MHz (50/100
kHz)
• Tuning grid: 50/100 kHz
• Sensitivity
• Mono, 26dB S/N Ratio: ≤22 dBf
• Stereo, 46dB S/N Ratio: ≥48 dBf
• Search Selectivity: ≤32 dBf
• Total Harmonic Distortion: <3%
EN
14
• Signal to Noise Ratio: ≥ 45 dB
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32, NTFS
• Supports MP3 file formats
Bluetooth
•
Bluetooth profiles: A2DP, AVRCP
• Bluetooth version: 2.1 + EDR
Main unit
•
Power supply: 100-240 V~, 50/60 Hz
•
Power consumption: 35 W
• Standby power consumption: ≤ 0.5 W
• Dimensions (WxHxD): 865 x 67.8 x 85.5
mm
•
Weight: 1.8 kg
• Built-in speakers: 4 x full range (54.5
mm/2", 6 ohm)
Subwoofer
• Impedance: 6 ohm
• Speaker drivers: 1 x 134 mm (5.25")
woofer
• Dimensions (WxHxD): 160 x 228 x 295
mm
• Weight: 2.5 kg
Remote control batteries
• 1 x AAA-R03-1.5 V
Standby power management
• When the product remains inactive for
15 minutes, it automatically switches to
standby or networked standby.
• The power consumption in standby or
networked standby is less than 0.5W.
• To deactivate Bluetooth connection, press
and hold the Bluetooth button on the
remote control.
• To activate Bluetooth connection, enable
Bluetooth connection on your Bluetooth
device, or enable Bluetooth connection via
the NFC tag (if available).
EN
15