Update Software; Check Software Version; Update Software Via Usb; Wall Mount - Philips htl1193b User Manual

5 Update software

To get the best features and support, update
your product with the latest software.

Check software version

In mute mode (press ), quickly press AUX
twice.
» The current software of this product is
displayed for 3 seconds, and then the
factory setting is restored.

Update software via USB

1
Check the latest software version on www.
philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB flash
drive.
a Unzip the download if zipped, and
make sure that the unzipped file is
named "HTL1193.BIN".
b Put the "HTL1193.BIN" file in the
root directory of the USB flash drive.
3
Switch this product to AUDIO IN source.
4
Connect the USB storage device to the
(USB) connector on this product.
5
Switch this product to AUX source, and
then switch this product to USB source.
6
Wait until the update starts and completes.
» When the update starts, "UPG"
(upgrade) is displayed on the display
panel.
» If the update is complete, this product
automatically turns off and on again.
EN
12
Caution
•
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this product.

6 Wall mount

Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
3.0-3.5mm/0.12"-0.14"
4mm/
0.16"
>25mm/0.98"
See the illustration in the quick start guide on
how to wall mount the SoundBar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the SoundBar on the fastening screws.
EN
13