Use Your Soundbar; Adjust The Volume; Choose Your Sound; Mp3 Player - Philips htl1193b User Manual

4 Use your
SoundBar
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the Quick Start Guide or download
the User Manual from www.philips.com/
support.
• Switch this product to the correct source
for other devices.

Adjust the volume

1
Press VOL +/- to increase or decrease a
volume level.
• To mute sound, press .
• To restore the sound, press again or
press VOL +/-.

Choose your sound

This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR to toggle between virtual
surround and stereo.
» When virtual surround is turned on,
ON SURR scrolls on the display panel.
» When stereo sound is turned on, OFF
SURR scrolls on the display panel.
EN
8
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of this product.
1
Press TREBLE +/- or BASS +/- to change
the treble or bass.
Synchronize video and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
Press AUDIO DELAY +/- to synchronize
the audio with the video.
• AUDIO DELAY + increases the sound
delay, and AUDIO DELAY - decreases
the sound delay.
Note
•
This feature is only applicable to COAXIAL (COAX)
and OPTICAL (OPT) sources.
Night mode
For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
1
Press NIGHT to turn night mode on or
off.
» When night mode is turned on, ON
NIGHT scrolls on the display panel.
» When night mode is turned off, , OFF
NIGHT scrolls on the display panel.

MP3 player

Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on this product.
2
Press AUDIO IN.
3
Press the buttons on the MP3 player to
select and play audio files or music.
• On the MP3 player, it is recommended
to set the volume in the range of 80%
maximum volume.

USB storage devices

Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
• An MP3 file on a USB storage device
1
Connect a USB storage device to this
product.
2
Press USB on the remote control.
3
Use the remote control to control play.
Button Action
Start or pause or resume play.
/ Skip to the previous or next track.
USB During play, press to toggle: repeat
one track and repeat off.
• If repeat mode is turned on, ONE
RPT scrolls on the display panel.
• If repeat mode is turned off, OFF
RPT scrolls on the display panel.
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3) are not supported.
•
Support a USB port: 5V , 1A.

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your SoundBar speakers.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 2.1 + EDR.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press on the remote control to switch
this product to Bluetooth mode.
» BT is displayed on the display panel,
blinking.
2
On the Bluetooth device, switch on
Bluetooth, search for and select Philips
HTL1193B to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
» During connection, BT on the display
panel blinks.
3
Wait until this product beeps.
» When the Bluetooth connection
succeeds, BT is displayed on the display
panel.
» If the connection fails, BT on the
display panel blinks continuously.
EN
9