Digital Output - Philips DVD590M Owner's Manual

DVD590M_17x 6/11/2003 1:42 PM Page 36

36 Digital Output

Adjust DIGITAL OUTPUT if you connected the DVD Player to a Stereo
using the Player's COAXIAL (DIGITAL AUDIO OUTPUT) jack.
1
Press SYSTEM MENU.
2
Press 1 or 2 repeatedly to select the AUDIO menu.
3
Press 4 to select DIGITAL OUTPUT.
4
Press 1 or 2 repeatedly to select BITSTREAM, LPCM 48K,
LPCM 96K, or OFF. Then press OK.
Choose BITSTREAM if you connected to a Stereo using the Player's
COAXIAL ( DIGITAL AUDIO OUTPUT) jacks.This selects the
original settings as received by most Stereos. If the sound is
distorted, your Stereo may need to receive audio in an LPCM (Pulse
Code Modulation) format.
LPCM 48K or LPCM 96K
Discs are recorded in a certain sampling rate. The higher the
sampling rate, the better the sound quality. Some Discs are
recorded in a high sampling rate of LPCM 96 KHz, while most are
recorded at 48 KHz. Choose LPCM 96K only if your Discs were
recorded at 96 KHz. Otherwise, set DIGITAL OUTPUT to LPCM
48K.
DVD
DIGITAL OUTPUT DIGITAL OUTPUT
: MOVE
5
Press SYSTEM MENU to remove the menus.
AUDIO AUDIO
BITSTREAM
: SELECT SYSTEM MENU : EXIT
1 2
3
EJECT
4 5 6
7 8 0
9
PREVIOUS NEXT
DISC MENU SYSTEM MENU
OK
RETURN/TITLE DISPLAY
SUBTITLE ANGLE ZOOM AUDIO
REPEAT REPEAT SEARCH MUTE
A-B
Helpful Hint
• If you set DIGITAL OUTPUT to
LPCM 96K, the sound may be
mute if the Disc is copy
protected by the Content
Scrambling System (CSS).
1,5
2-4