End Block Assembly; Power Switch Assembly; Keyboard Assembly - Yamaha CLP-150 Service Manual

CLP-150/CLP-150M/CLP-150C
15.

End Block Assembly

(Time required : About 25 minutes)
15-1 Remove the top board assembly. (See procedure 2)
15-2 Remove the key cover assembly. (See procedure 9)
15-3 Remove the panel assembly. (See procedure 13)
15-4 Remove the screw marked [69]. The end block assembly
L can then be removed. (Fig. 15)
* The end block assembly R can then be removed in the
same manner.
16.

Power Switch Assembly

(Time required : About 25 minutes)
16-1 Remove the top board assembly. (See procedure 2)
16-2 Remove the key cover assembly. (See procedure 9)
16-3 Remove the panel assembly. (See procedure 13)
16-4 Remove the end block assembly R. (See procedure 15)
16-5 Remove the two (2) screws marked [8]. The power switch
assembly can then be removed. (Fig. 16)
17.

Keyboard Assembly

(Time required : About 30 minutes)
17-1 Remove the top board assembly. (See procedure 2)
17-2 Remove the key cover assembly. (See procedure 9)
17-3 Remove the speaker box assembly. (See procedure 11)
17-4 Remove the rack assembly. (See procedure 12)
17-5 Remove the panel assembly. (See procedure 13)
17-6 Remove the end block assembly L and R.
(See procedure 15)
17-7 Remove the two (2) screws marked [54] and the nine
(9) screws marked [52]. The keyboard assembly can then
be removed. (Fig. 17)
[52] [54]
12
[54]: Bind Head Tapping Screw-1 4.0x14 MFZN2Y (EP040230)
[52]: Pan Head Screw PW5.0x25 MFZN2Y (VV040700)
(Fig. 17)
End block assembly L
[69]: Truss Head Tapping Screw-1 3.5x30 MFZN2Y (VA076400)
[8]
Power switch assembly
[8]: Bind Head Tapping Screw-1 3.5x10 MFZN2BL (EP030320)
[52]
[69]
(Fig. 15)
(Fig. 16)
[52]
[54]
Keyboard assembly