Sony HCD-ZUX10D Service Manual page 28

HCD-ZUX10D
[TUNER STEP CHANGE]
• The step interval of AM channels can be toggled between 9
kHz and 10 kHz. This mode is not available for Saudi Arabian
and Russian models.
Procedure:
1. Press button to turn on the system.
@/1
2. Press [TUNER/BAND] button repeatedly to select the "AM".
3. Press button to turn off the system.
@/1
4. Press [ENTER] button and
system turns on automatically. The message "AM 9K STEP"
or "AM 10K STEP" appears on the fluorescent indicator tube
and thus the channel step is changed.
[DVD TRAY LOCK MODE]
• This mode let you lock the disc tray. When this mode is
activated, the disc tray will not open when
button or [DISC SKIP/EX-CHANGE] button is pressed. The
message "LOCKED" will be displayed on the fluorescent
indicator tube.
Procedure:
1. Press button to turn on the system.
@/1
2. Select DVD function.
3. Press button and
x Z OPEN/CLOSE
and hold down until "LOCKED" or "UNLOCKED" displayed
on the fluorescent indicator tube (around 5 seconds).
[DVD SHIP MODE (WITH MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable
to vibration and clears all data including preset data stored in
the RAM to initial conditions during the next AC-In. Use this
mode when returning the set to the customer after repair.
Procedure:
1. Press button to turn on the system.
@/1
2. Select DVD function.
button, [DISC 1] button and
3. Press
x
during "DVD NO DISC" condition. The system turns off
automatically.
4. After the "STANDBY" blinking display finishes, a message
"MECHA LOCK" is displayed on the fluorescent indicator
tube and the DVD ship mode is set.
[DVD SHIP MODE (WITHOUT MEMORY CLEAR)]
• This mode moves the optical pick-up to the position durable
to vibration. Use this mode when returning the set to the
customer after repair.
Procedure:
1. Press button to turn on the system.
@/1
2. Select DVD function.
3. Press [DVD] button and
"DVD NO DISC" condition. The system turns off
automatically.
4. After the "STANDBY" blinking display finishes, a message
"MECHA LOCK" is displayed on the fluorescent indicator
tube and the DVD ship mode is set.
28
button simultaneously. The
@/1
Z OPEN/CLOSE
button simultaneously
button simultaneously
@/1
button simultaneously during
@/1
[DVD COLOR SYSTEM]
• This mode let you change the color system of the video output
from PAL to NTSC or vice-versa. This mode is not available
for Latin American and Russian models.
Procedure:
1. Press button to turn on the system.
@/1
2. Select DVD function.
3. Press button again to turn off the system.
@/1
4. Press button and
X @/1
will turn on automatically.
The message "COLOR PAL" or "COLOR NTSC" appears on
the fluorescent indicator tube.
[TCM OFFLINE MODE]
• This mode prevents the system from turning off automatically
when TCM is not connected. Therefore, measurements can
be done even when TCM is not connected during production.
Procedure:
1. When the system in turned off, press [EQ BAND/MEMORY]
button, [DIRECTION] button and
The system turns on automatically.
2. The message "TCM OFFLINE" will be displayed on the
fluorescent indicator tube.
[REMOTE DISABLE MODE]
• This mode let you disable the remote commander reception.
When this mode is activated, the system will not response if
the button on the remote commander is pressed. The message
"Remote Disable" appears on the fluorescent indicator tube.
This mode is essential for conducting test and repairing when
no interruption from the other remote commander is expected.
This mode is cancelled automatically when the system is turned
off.
Procedure:
1. Press button to turn on the system.
@/1
button, [FLANGER] button and [DISC 2] button
2. Press
x
simultaneously until "Remote Disable" or "Remote Enable"
appears on the fluorescent indicator tube.
[FACTORY PRESET]
• This mode is used to load all the factory use preset frequencies
into FM 1-FM 20 and AM 1-AM 10. Originally, frequency of
FM 1-FM 20 and AM 1-AM10 are set to the minimum.
Procedure:
1. Press button to turn on the system.
@/1
button, [TUNER/BAND] button and
2. Press
@/1
button simultaneously. The message "Factory" appears on the
fluorescent indicator tube. The function is changed to TUNER
automatically.
• To release from Factory Preset Mode
To release from this mode, perform "COLD RESET".
[VACS DISPLAY]
• This mode is used to check the VACS level.
Procedure:
1. Press button to turn on the system.
@/1
button, [DVD] button and [DISC SKIP/EX-CHANGE]
2. Press
x
button simultaneously.
button simultaneously. The system
button simultaneously.
@/1
Z OPEN/CLOSE