Vivotek VS8102 User Manual page 125

enableremotelog <boolean>
serverip <IP address>
serverport 514,
level 0~7
Group: camctrl_c<0~(n-1)> for n channel product
NAME
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
patrolseq
patroldwelling
Group: snmp (capability.snmp) (product dependent)
NAME VALUE
v2 0~1
v3 0~1
0
<blank>
514
1025~65535
6
VALUE DEFAULT
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
string[64] <blank>
string[128] <blank>
DEFAULT
0
0
6/6 Enable remote log.
6/6 Log server IP address.
6/6 Server port used for log.
6/6 Levels used to distinguish the
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
(capability.ptzenabled)
SECURITY DESCRIPTION
(get/set)
1/4 Pan speed
1/4 Tilt speed
1/4 Zoom speed
1/4 Auto pan speed
1/4 Auto focus speed
1/4 (For external device)
The indexes of patrol
points, separated by ","
1/4 (For external device)
The dwelling time of each
patrol point, separated
by ","
SECURITY
(get/set)
6/6
6/6
VIVOTEK
importance of the
information:
DESCRIPTION
SNMP v2 enabled. 0 for
disable, 1 for enable
SNMP v3 enabled. 0 for
disable, 1 for enable
User's Manual - 125