Audio Setup - Philips 525p User Manual

[Low Power Standby]
Turns off or on the low power standby mode.
Reduces power consumption in standby
mode.
• [On] – Sets the standby mode to low
power.
• [Off] – Sets the standby mode to normal
power.
[DivX(R) VOD Code]
Displays the DivX® registration code.
Tip
•
Enter this Home Theater System DivX
registration code when you rent or purchase
video from www.divx.com/vod. The DivX
videos rented or purchased through the
DivX® VOD (Video On Demand) service
can be played only on the device to which it is
registered.

Audio setup

Ambisound Setup
HDMI Audio
Night Mode
1
Press SETUP .
» [General Setup] menu is displayed.
2
Press to select [Audio Setup] , then
press .
3
Select an option, then press OK .
4
Select a setting, then press OK .
• To return to the previous menu,
press BACK .
• To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[Ambisound Setup]
Optimizes the Ambisound based on this
Home Theater System setup in the room (see
'Getting Started' > 'Start Ambisound setup').
Option Description
[Room Selects the type of walls that
Acoustics] surround the room.
[Room Selects the placement in the
Placement] room.
[Speaker Selects the distance between
Distance] speakers.
[Listening Selects the distance between
Position] the listening postion and this
Home Theater System.
SETUP .
EN 39