Philips 525p User Manual page 41

[TV Display]
Selects one of the following display formats:
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
• [4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
• [4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
• [16:9 Wide Screen] – For wide-screen
TV: display ratio 16:9.
[Picture Setting]
Selects a predeÀ ned set of picture color
settings or customize the personal setting.
• [Standard] – Original color setting.
• [Bright] – Vibrant color setting.
• [Soft] – Warm color setting.
• [Personal] – Customizes the color setting.
Set the level of brightness, contrast,
sharpness/tint and color saturation, then
press OK .
[HDMI Setup]
Selects the HDMI video setting when you
connect this Home Theater System and the
TV with a HDMI cable.
• [Wide Screen Format] – DeÀ nes wide
screen format for disc play.
Option Description
[Superwide] Center position of the screen
is stretched less than the side.
Applicable only to 720p and
above video resolution setting.
[4:3 Pillar No stretching of picture. Black
Box] bars are displayed on both
sides of the screen.
[Off] Picture is displayed according to
the disc format.
•
16:9 (Wide Screen)
•
Option
[Auto]
[480i] , [480p] ,
[576i] , [576p] ,
[720p] ,
[1080i] ,
[1080p]
•
[Closed Caption]
Turns off or on display captions.
•
•
[Progressive]
If the TV supports progressive scan output,
you can turn on the progressive scan mode to
enhance the picture quality. Video connection
through Component Video is required.
•
•
•
Note
This setting is only available if you have set the
[TV Display] setting to [16:9 Wide Screen] .
[HDMI Video] – Selects the HDMI video
output resolution that is compatible with
your TV display capability.
Description
Detects and selects the best
supported video resolution
automatically.
Selects a video resolution
that is best supported by the
TV. See the TV manual for
details.
Note
If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for
auto recover or press HDMI repeatedly until
the picture appears.
[On] – Shows the sound effects in
subtitles. Applicable only to discs with
Closed Caption information included and
the TV supports this feature.
[Off] – Disables closed caption.
[On] – Turns on progressive scan mode.
[Off] – Disables progressive scan mode.
Tip
There is more detailed description available (see
'Get started' > 'Turn on Progressive Scan').
EN 41