Resetting The Lamp Timer - Epson EB-145OUI User Manual

Projector Lamp Maintenance
h Push in the lamp firmly and tighten the screws to secure it.
i
Replace the lamp cover and tighten the screw to secure it.
• Make sure the lamp cover is securely installed or the projector
a
will not turn on.
• Do not replace the lamp cover with too much force and make
sure the lamp cover is not deformed.
Reset the lamp timer to zero to monitor the new lamp's usage.
g g Related Links
• "Replacement Parts" p.279

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the
lamp replacement message and to monitor lamp usage correctly.
Do not reset the lamp timer if you have not replaced the lamp to avoid
a
inaccurate lamp usage information.
a
Turn on the projector.
b Press the [Menu] button on the control panel or remote control.
c Select the Reset menu and press [Enter].
252