Table of Contents
Advertisement
Projector Lamp Maintenance
When the projector is suspended from a wall or ceiling and you
a
need to replace the lamp, remove the lamp cover carefully and
support it with your hand to prevent it from falling.
e
Loosen the screws securing the lamp to the projector. The screws do
not come all the way out.
f
Grip the lamp handle and carefully pull the lamp out of the projector.
• If you notice the lamp is cracked when removing the lamp,
a
replace it with a new lamp, or contact Epson for help.
• The lamp(s) in this product contain mercury (Hg). Check your
local laws and regulations regarding disposal or recycling. Do
not put in the trash.
g
Gently insert the new lamp into the projector. If it does not fit easily,
make sure it is facing the right way. Press the handle up.
Attention
Do not touch any glass on the lamp assembly to avoid premature lamp
failure.
251
Advertisement
Table of Contents
