Whenever a filter is blocked and needs cleaning, the red
LED in the handle will illuminate. Clean dust from filter (See
"Cleaning the Dust Bowl and Filter" section).
Nozzle / Accessories
A crevice tool
is built into the nozzle
crevice tool as shown in Figure E, until it clicks in place.
To shorten the crevice tool, depress the crevice tool
as shown in Figure F and slide the
crevice tool into the nozzle.
Attaching the pet head (Fig. G)
Slide the nozzle
into the opening of the motorized
, ensuring that the connectors
with the recesses
Detaching the pet head (Fig. H)
Push the motorized pet head release button
Lift the main unit from the pet head
. Extend the
. An audible click will be heard.
Removing the beater bar from the pet
head (Fig. I)
Press the beater bar release button
Lift the beater bar
The beater bar can now be freed from any hair and
Dry pick up
For everyday spills of dry material.
Do not fill the dust bowl
Optimizing the suction force
In order to keep the suction force optimised, the filters must
be cleared regularly during use.
EMPTYING AND CLEANING THE PRODUCT
Removing the dust bowl and filters -
Figures J & K
WARNING: The filters are reusable and should be
Press the dust bowl release button
insert of Figure J, then pull the dust bowl
as shown in Figure J.
up and out of the pet head.
beyond the end of the
as shown in the