Installing A Blade; Removing A Blade - Performax COMPACT PX12 LITHIUM-ION Owner's Manual

INSTALLING A BATTERY IN THE
OSCILLATING TOOL – cont'd
3. Slide the fully charged battery into the
matching cavity in the tool handle
where the discharged battery has
been removed.
NOTE: Make sure the two keys (3) in the
battery stem align with the matching key
ways (4) in the handle. The battery release
button will "click" into place when the
battery is fully installed
!
WARNING:
battery pack in water. Sudden cooling
could cause the hot battery to explode or
leak.

INSTALLING A BLADE

!
WARNING:
battery before installing or removing a
blade or adjusting the saw in any way.
To install a blade in the saw, rotate the
blade-locking sleeve clockwise (1) as far
as it will go (Fig. 6).
2. Insert the appropriate blade (2) into
the blade slot (3) as far as it will go.
3. Release the blade-locking sleeve.
NOTE: The blade will automatically be
locked into the blade holder. Pull outward
on the blade to ensure it is properly locked
into the blade holder.

REMOVING A BLADE

To remove a blade, simply rotate the
blade-locking sleeve clockwise as far as it
will go and remove the blade from the
blade holder.
ASSEMBLY AND OPERATING
.
Do not immerse the
Always remove the
17
Fig. 5
Fig. 6