Docomo F-11C Instruction Manual page 105

2
Double-click the type of each device→Confirm that the name of the following
devices are registered.
･
Device types and names are shown as below.
The order to be displayed differs depending on
OSs.
-ポート(COMとLPT) (Port (COM and LPT)) :
FOMA F09C Command Port (COMx)
FOMA F09C OBEX Port (COMx)
-モデム (Modem) : FOMA F09C
-ユニバーサルシリアルバスコントローラー
(Universal Serial Bus Controller) or USB
(Universal Serial Bus) コントローラ
(Controller) : FOMA F09C
* Depending on the PC environment, x
represents different numbers.
◆ Uninstalling FOMA communication configuration file (driver)
･
Before operating, refer to "Precautions for installation/uninstallation".→P5
･
Before operating, remove FOMA terminal from the PC.
<Example> Uninstalling the driver under Windows 7, Windows Vista
1
Click (Start)→"コントロールパネル (Control panel)"→"プログラムのアンイ
ンストール (Uninstall programs)" in the "プログラム (Programs)" category.
Under Windows XP
Click "スタート (Start)"→"コントロールパネル (Control panel)"→"プログラムの追加と削除 (Add/
delete Programs)".
2
Select "FOMA F09C USB Driver" or "FOMA F09C USB" and click "アンインス
トールと変更 (Uninstall and change)" (for Windows XP, "変更と削除 (Change
and delete)").
3
Confirm that "FOMA F09C Uninstaller" is displayed and click "はい (Yes)".
The uninstall process starts.
4
If the "ドライバを削除しました (Driver deleted)" screen appears, click "OK".
✔INFORMATION
･
When "FOMA F09C USB Driver" or "FOMA F09C USB" is not displayed on the deletion screen, execute the
operations in "Installing FOMA communication configuration file (driver)" again and uninstall.→P7
*
*
8