Front And Rear Differential Lock System - Toyota LAND CRUISER Owner's Manual

(c) Shifting procedure
SHIFTING BETWEEN "H2" AND "H4"
To shift from "H2" to "H4", move the
four−wheel drive control lever with both
the free−wheeling hubs engaged.
This can be done at any vehicle speed.
You need not depress the clutch pedal. If
you have trouble shifting, depress or re-
lease the accelerator pedal momentarily
while pushing the four−wheel drive control
lever.
CAUTION
D Never move the four−wheel drive
control lever if wheels are slipping.
Stop the slipping or spinning before
shifting.
Never drive with only one hub en-
D
gaged.
To shift from "H4" to "H2", simply move
the four−wheel drive control lever. Disen-
gage both the free−wheeling hubs for con-
tinued "H2" use.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you shift the four−wheel drive control lever
into "H2", drive straight ahead while accel-
erating or decelerating, or drive in re-
verse.
SHIFTING BETWEEN "H4" AND "L4" SHIFTING BETWEEN "H4" AND "L4" SHIFTING BETWEEN "H4" AND "L4"
To shift from "H4" to "L4", stop the
vehicle or reduce your speed to less than vehicle or reduce your speed to less than vehicle or reduce your speed to less than
8 km/h (5 mph). With your foot off the 8 km/h (5 mph). With your foot off the 8 km/h (5 mph). With your foot off the
accelerator pedal, depress the clutch ped- accelerator pedal, depress the clutch ped- accelerator pedal, depress the clutch ped-
al and move the four−wheel drive control wheel drive control wheel drive control
lever while lifting it up. lever while lifting it up. lever while lifting it up.
To shift from "L4" to "H4", depress the To shift from "L4" to "H4", To shift from "L4" to "H4",
clutch pedal with your foot off the acceler- clutch pedal with your foot off the acceler- clutch pedal with your foot off the acceler-
ator pedal and move the four ator pedal and move the four ator pedal and move the four−wheel drive
control lever.
This can be done at any vehicle speed. This can be done at any vehicle speed. This can be done at any vehicle speed. This can be done at any vehicle speed. This can be done at any vehicle speed.
Front and rear differential
lock system
stop the stop the
The front and rear differential lock sys-
tem is provided for use only when
wheel spinning occurs in a ditch or on
a slippery or ragged surface.
This differential lock system is effective in
case one or either right or left pair of the
wheels are spinning.
Before using the front and rear differential
lock system, first shift the four−wheel
drive control into "H4" or "L4" with the
free−wheeling hubs engaged to see if it
works. If this has no effect, additionally
use the front and rear differential lock
system.
93