Toyota LAND CRUISER Owner's Manual page 117

1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station (see "SEEK/TRACK" or
"TUNE·FILE"). Push and hold down the
button until you hear a beep—this will set
the station to the button. The preset but-
ton number will appear on the display.
To tune in to a preset station: Push the
button for the station you want. The pre-
set button number and station frequency
will appear on the display.
This radio can store one AM and two FM
stations for each button (The display will
show "AM", "FM1" or "FM2" when you
push the "AM", "FM1" or "FM2" button).
(Eject button)
Push this button to eject a compact disc.
(Reverse/Fast forward button)
Push and hold " " (preset button 6) or
" " (preset button 5) to fast forward or
reverse within a compact disc. When you
release the button, the player will resume
playing.
110
AM
Push the "AM" button to turn on the AM
band. "AM" will appear on the display.
AUDIO CTRL (Tone and sound balance AUDIO CTRL (Tone and sound balance AUDIO CTRL (Tone and sound balance
adjustment function)
Each time you push the "AUDIO CTRL" Each time you push the "AUDIO CTRL" Each time you push the "AUDIO CTRL"
knob, the mode changes. To adjust the knob, the mode changes. To adjust the knob, the mode changes. To adjust the
tone and balance, turn the knob. tone and balance, turn the knob. tone and balance, turn the knob.
BAS: Adjusts low−pitched tones. The dis- pitched tones. The dis- pitched tones. The dis-
play ranges from −5 to 5. 5 to 5. 5 to 5.
TRE: Adjusts high−pitched tones. The dis- pitched tones. The dis- pitched tones. The dis-
play ranges from −5 to 5. 5 to 5. 5 to 5.
FAD: Adjusts the sound balance between FAD: Adjusts the sound balance between FAD: Adjusts the sound balance between
the front and rear speakers. The display the front and rear speakers. The display the front and rear speakers. The display
ranges from F7 to R7. ranges from F7 to R7. ranges from F7 to R7. ranges from F7 to R7. ranges from F7 to R7.
For vehicles equipped with two speakers, For vehicles equipped with two speakers, For vehicles equipped with two speakers, For vehicles equipped with two speakers, For vehicles equipped with two speakers,
no sound will be emitted if R7 is selected. no sound will be emitted if R7 is selected. no sound will be emitted if R7 is selected.
BAL: Adjusts the sound balance between BAL: Adjusts the sound balance between BAL: Adjusts the sound balance between BAL: Adjusts the sound balance between BAL: Adjusts the sound balance between
the right and left speakers. The display the right and left speakers. The display the right and left speakers. The display
ranges from L7 to R7. ranges from L7 to R7. ranges from L7 to R7.
DISC (Compact Disc) DISC (Compact Disc) DISC (Compact Disc)
Push the "DISC" button to play a compact
disc.
When the audio system is set into com-
pact disc operation, the display shows the
track number currently being played.
Error messages
If the player malfunctions, your audio sys-
tem will display following error messages.
"WAIT": The compact disc player unit
may be too hot. Allow the player to cool
down.
"ERROR 1": The disc may be dirty, dam-
aged or inserted incorrectly
down). Clean the disc and re−insert it.
"NO DISC": The compact disc changer of
separate unit is empty. Insert a disc.
"ERROR 3": There is a problem inside
the system. Eject the disc or magazine.
Set the disc or magazine again.
"ERROR 4": Over−current.
Toyota dealer to inspect.
"CD OPEN": The compact disc changer
lid of separate unit is open. Close the
compact disc changer lid.
(up−side
Ask your