Service Mode - Panasonic HDC-SDT750PP Service Manual

6 Service Mode

1. Indication method of the service menu
Set the mode dial "Motion Picture Recording" mode.
2. Turn the power on, and then while keep pressing the "Zoom lever" to W side, "Intelligent auto/Manual" button and "Menu" but-
ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
Service mode menu
Screen display
1
3
4
5
NOTE:
Do not using service mode except above table of Service mode menu.
3. End method of the top screen of the service mode menu
Push the "Menu" button to end the service mode, and then POWER OFF.
Contents
Factory settings
Built-in memory self check execution
(HDC-TMT750 only)
Lock search history indication
Power ON self check result display
Function
Function to throw a product up in a factory shipment state
(When recorded data in Built-in memory, "error display" is done)
Function to check self as for the state of Built-in memory
Display the camera system error cord for three histories saved
in EEPROM
Power ON self check (function to diagnose correct function of
the device and interface between devices) result display
19