Table of Contents
Advertisement
N-380 User Manual
08/18/2008 V1.0
[Inserting an SD Card]
With the card facing forward, align the card with the slot to insert it in place.
When removing the SD card, first confirm that the SD card is idle and then press its top edge
slightly to release it. Finally pull out the card.
[Notice]
● Do not place anything other than an SD card in the SD Card Slot.
● When outside the N-380, the SD card should be repacked properly to avoid dust and humidity.
1.6 Bottom
2. Powering the ProGin N-380
2.1 Power On
1
2
To power the ProGin N-380, press the Power Button (1) gently and wait for approximately 5
seconds. The Power Indicator Light (2) will glow green. This means the unit is ready to use.
2.2 Power Off
6
Copyright© 1998-2008
ProGin
Advertisement
Table of Contents
