System Update - ProGin N-380 User Manual

Displays the
current location in
GPS parameters
(Latitude/Longitud
e and Altitude) and
almanac data
contains orbit
information on all
satellites, clock
corrections, and
atmospheric delay
parameters
3.11 Stylus
To re-calibrate the touchscreen, follow the directions given on the screen
press and briefly hold stylus on the center of the
repeat as the target moves around the screen

3.12 System Update

Download the latest N-380 firmware update module from the manufacturer
2］ Decompress and unpack the update module, if required, and save the entire contents of the
module (including the directory created during the unpacking process) to the root directory of the
SD card.
3］Insert the SD card into the N-380 turn on the power to the N-380.
4］Press the System button on the Main Menu and press the Next Page button to go to the
second page of the System Settings menu.
5］ Press the System Update button to begin the update. At this point, the N-380 will search the
SD card for an update directory and, if one is found, the current firmware version and the version
target
press the Ese key to cancel.
23
Copyright© 1998-2008
N-380 User Manual
08/18/2008 V1.0
GPS
Synchronization
Clock
NEMA data
logging and
monitoring
ProGin