ProGin N-380 User Manual page 10

not glow, but the battery will still be charged. The charging process may need several hours.
3.3 Mounting System
A mounting system is included with the ProGin N-380. The parts of this system are:
1. A suction cup mount with swivel and tilt arms
2. A base plate(Optional)
The suction cup mount will attach the N-380 to a surface. In case the desired mounting surface is
not capable of holding the suction cup, the base plate (2) may be used to provide an appropriate
mounting surface.
[Notice] Some local ordinances do not allow objects to be mounted to an automobile windshield
or other automobile windows. If you wish to use the N-380 in an automobile and such
ordinances exist in the jurisdictions in which you will be driving, then mount the N-380 to
the automobile's dashboard
1
3.3.1 Assembling the Mounting System
1. Align the clip on at one end of the suction cup mount with the slot on the back of the
unit.
2. Push the clip into the narrow section of the slot until it snaps into place.
Suction Cup
.
Tilt and swivel
k t
2
Slot
Clip
9
Copyright© 1998-2008
N-380 User Manual
08/18/2008 V1.0
Optional base plate
ProGin