Operating Instructions - ProGin N-380 User Manual

USB cable, the computer will auto detect the unit and its SD card drives if present.
2.
Transferring Files with an SD Card
For large files such as movies, it may be faster to transfer files to the N-380 by writing them directly
from a computer to an SD card (not included). To do this, place the SD card into an SD card
reader/writer (not included) and connect the reader/writer to the computer. The computer should
be able to recognize the reader/writer and should automatically mount the file system stored on
the card. (If this does not happen, consult the documentation for your reader/writer.) When the
file system is mounted, the files can be transferred via typical file operations. When all files are
transferred, unmount the card's file system and remove the reader/writer from the computer.
Then remove the card from the reader/writer and insert the card into the N-380. The files will
then be available for use.
3.
File Format Conversion Software
In order for some files to play on the ProGin N-380, they must be converted into formats that the
unit can read. To convert files, use the following steps:
1. Refer to the "shareware reference" folder on the included CD to select a software download
website. Visit the site using a Web browser.
2. Select and download conversion software for the file formats you want to convert (for example,
converting RealMedia format to MPEG-4 or MP3 format).
3. Install the downloaded software.
4. Use the software to convert your files.
5. Copy the converted files to the ProGin N-380 or to an SD card.
[Remark] The use of downloaded software may be restricted to a trial period. If you want to use it
for longer than this period, you should register or purchase the software.

Operating Instructions

1.
Introduction
1.1 Common Interface Items
12
Copyright© 1998-2008
N-380 User Manual
08/18/2008 V1.0
ProGin