Replacing The Circulation Filter - Hitachi IJ RX2 Technical Manual

6.9 Replacing the circulation filter

● Perform it a state in which the ink has been drained. The ink is not wasted if performed simultaneously with
the ink replacement.
Perform
2
1
● Perform from ink drainage to place the ink reservoir tube connection block back into position.
● Perform operation in accordance with the operation guide on the screen.
Replace the circulation filter. See "6.8 Replacing the recovery filter" for the
2
replacement procedure.
Perform
3
3
● Refill the IJ Printer with ink.
Open the Part usage time mgmt. screen (menu 2 of the Circulation control
4
screen) and set the time of the circulation filter to "0".
Parts usage time mgmt.
Ink filter
Recovery filter
Circulation filter
Makeup filter
Air filter
MGV filter
R. Air filter
＜Consumption＞
Ink
Makeup
Print count
Update log 2015/03/22 08:15
-(a) to -(c) of the procedure in "6.3 Replacing the ink".
2
Circulation filter
-(a) to -(i) of the procedure in "6.3 Replacing the ink".
3
[Stop ]
（hours）
０１０００ ０００００
０１０００ ０００００
０００００ ０００００
０１０００
０１０００
０１０００
０１０００
００１０００ (ml)
００１０００ (ml)
０００００１０００
2015.07.07 12:45
Com=0
（hours）
Pump ０１０００
Heating unit ０１０００
ＭＶ１ ０１０００
ＭＶ２ ０１０００
ＭＶ３ ０１０００
ＭＶ４ ０１０００
ＭＶ５ ０１０００
ＭＶ６ ０１０００
ＭＶ７ ０１０００
ＭＶ８ ０１０００
ＭＶ９ ０１０００
HOME
Back
●Replacing the circulation filter 6-24